Portal by PermitsPros  ·  ← Portal home
Installer fitting a mag-lock on a commercial door
Access Control & Mag-Lock Permits

Your mag-locks, permitted — without you ever leaving the jobsite.

Electromagnetic locks go through Fire Department review in most cities. We handle the plans, the cutsheets, the portal, the corrections, and the inspection. You keep installing.

File my permit — same dayCheck my city — free
$495 / site · SFFD + DBI review · city fees at cost
Proof — run in San FranciscoAccess-control permitting run in San Francisco — SFFD fire plan check, DBI job card, fire final test. Permit 202606173375, issued October 2026.

Real work, real doors, real permits

This isn't a form-filling service. We file access-control permits every week — we know which reviewer asks for what, which portal lane moves fastest, and what triggers a correction before it happens.

Installer fitting mag-lock hardware on a commercial door
On the jobsite — mag-lock installed, tied to fire alarm, ready for inspection.
Close-up of installed electromagnetic lock
The hardware, done right — listed, fail-safe, released on alarm.
Access control kit: mag-lock, keypad, exit button
The full kit — lock, keypad, exit device. We permit all of it.

How the permit runs — six steps

1

Intake

Send the drawings and hardware cutsheets (or just the drawings; we build the packet). Signed authorization + photo ID, same letter-first intake as every PermitsPros order.

2

Plans & cutsheets

We check the set against the egress rules before anyone files: sensor release, push-to-exit placement, fail-safe behavior, UL listings.

3

SFFD review

Fire plan check on the life-safety side: the locks' release on alarm is the review.

4

DBI job card

The permit issues with the DBI job card; the card is the job's record on site.

5

Install

Your crew installs to the approved set; we track the record while you work.

6

Final test

The fire-alarm final test is scheduled and coordinated; locks release on alarm, witnessed. Signed-off permit delivered.

Anatomy of a compliant door

Five things San Francisco's code looks for on a sensor-release egress door. Each one is a line item at review — and at the final test.

Diagram of a compliant sensor-release egress door Door elevation showing a fail-safe mag-lock, an egress-side motion sensor, a PUSH TO EXIT button 40 to 48 inches above the floor within 5 feet of the door, a fire alarm tie-in, and UL 294 / UL 1034 listed hardware. UL 294 PUSH TO EXIT within 5 ft of the door 40–48 in. above floor 1 2 3 4 5
  1. 1Mag-lock — fail-safe. Loss of power to the lock unlocks the door. The rule →
  2. 2Egress-side motion sensor. Detects an approaching occupant and unlocks the door. The rule →
  3. 3PUSH TO EXIT button. 40–48 inches above the floor, within 5 feet of the door; it directly interrupts power and keeps the door unlocked at least 30 seconds. The rule →
  4. 4Fire alarm tie-in. The doors unlock the moment the fire alarm, sprinkler, or detection system activates — and stay unlocked until the system is reset. The rule →
  5. 5Listed hardware. The locking device is listed to UL 294 or UL 1034. The rule →

Installed vs. installed right

Installed

Hardware on the door, invoice paid, no permit record. First fire inspection or final: egress violation, correction notice, the locks come off or the door stays locked out of service.

Installed right

Permit filed before the work, SFFD + DBI review passed, final test witnessed. The door is an asset at sale, refi, and inspection — not a finding.

The permit is the cheap part of getting caught without one.

What's included — $495/site

  • Fire + building department review handled end-to-end
  • Plans and cutsheets checked before filing
  • Filed same-day through the city's portal
  • One corrections round included
  • Inspection scheduled and coordinated
  • San Francisco jobs: SFFD fire final-test scheduling and coordination included
  • City fees at cost — always shown up front

Popular add-ons

  • $195 — plan code-review before filing (catch corrections before the city does)
  • $195+ — cutsheet packet built for you (UL listings verified)
  • Free — mag-lock jurisdiction checker (does your city even need a separate filing?)

Additional corrections rounds are $295 each — quoted in writing before we resubmit, never a surprise.

What it costs — no fine print

PermitsPros

$495 per site — covers up to 9 entries

One flat number per project, set by how many entries are controlled — quoted up front, never a meter.

Entries (doors / openings)Service fee
1–9 entries$495
10–24 entries$795
25–49 entries$1,195
50+ entries$1,695
  • Review handled end to end — plans and cutsheets checked before filing
  • One corrections round included

Optional: $195 plan code-review (before filing) · $195+ cutsheet packet built for you — the add-ons stay flat at every tier.

City of San Francisco — at cost

From the city's own published schedule:

  • Security-system electrical permit: $320 (up to 10 components), +$52 per additional 10
  • Witnessed fire-alarm testing: $519/hour when the city requires it

Every city dollar is passed through with the receipt — never marked up.

Three ways in

Installers & GCs

You install, we file.

Check your cityOrder the permit

Building owners & PMs

Inherited mag-locks? Find out where you stand.

Check your cityOrder the permit

Apartment & HOA

Gates and lobby doors are egress hardware.

Check your cityOrder the permit

We speak your city's language

Houston has a dedicated "Electronic locks" permit. Denver has an Access Control Permit. Chicago needs no separate filing. Nashville wants a notarized registration and a $40K bond before you can even apply. We map every AHJ's portal, signup friction, and rejection quirks before we touch your submittal — 31 metros mapped, 30 of them studied in depth in the October 2026 scan.

Run the free 60-second checker for your city →

What San Francisco requires

San Francisco has a specific checklist for mag-locks — sensor release, push-to-exit placement, fail-safe unlock, alarm release, UL listings, and a fire-chief approval for high-rise lobbies.

Read exactly what the city requires →

What your city requires

Every city runs mag-locks through its own vehicle, its own reviewers, and its own final. These are the California pages — the cities where the permit runs through the fire department twice: once on paper, once in person.

San FranciscoSFFD fire plan check + DBI review on PermitSF, closed by a witnessed SFFD final test.The requirements →
San JoseBuilding permit plus an SJFD fire-protection system permit — plan approval before anything installs, and SJFD witnesses the device test.The requirements →
OaklandThe Fire Prevention Bureau approves the devices themselves, reviews the plans, and closes the job with two finals billed at $500/hr.The requirements →
Los AngelesLADBS files first, then LAFD plan check on the fire-alarm tie-in — and elevator lobbies run their own approval-letter track.The requirements →
San DiegoThe fire permit runs through Development Services, not the fire department — and a Fire Alarm Final is required on every fire alarm building.The requirements →
SacramentoBuilding permit with Fire Prevention Division review, and the city's own inspection codes — including 702 GATES/ACCESS.The requirements →

Filed today. You never left the job.

That's the whole pitch. One call, one flat price, and your mag-lock permit is moving through the city while you're on to the next install.

Place your permit order

PermitsPros Comm Inc · City of Concord Business License No. 5027635 · We file permits. We never promise approvals — that's the city's call, and we tell you so up front.

Filed today. You never left the job.